Walltec Walls are non-load bearing concrete hollowcore walls that offer superior properties for a whole range of uses. The walls are produced to order in standard widths and thicknesses and in lengths to suit room height as well as desired densities and strength. Since their introduction in the early 1990s, Walltec walls have proven themselves in 13 countries with the strictest standards and requirements on seismic, moisture and fire resistance as well as sound insulation such as Germany, Finland, Ireland, Spain, Japan, Singapore, Malaysia and China.

Walltec Concrete Hollowcore Walls are:
  • 2500-3300 mm long
  • 68 - 140 mm thick
  • 600 mm wide as standard
  • Have 5-8 hollows depending on the thickness
  • Conventional concrete 92mm thick wall having weight of around 110kg/m2 and lightweight concrete 92mm thick wall having weight of around 70kg/m2.
Salient Features:
  • Simple installation with unskilled workers
  • Moisture, Rot & Mold resistant
  • Fire resistant
  • Termite resistant
  • Controlled Concrete Quality at 30 - 45N/mm2
  • 92mm and 120mm thickness of finished Walltec partition wall compared to 150mm of brick wall with plaster on both sides.
  • 20% cost saving for the builder compared to brick/block masonry and plaster
  • 50% Time saving for the builder compared to brick/block masonry and plaster
  • Lower overall cost of finished wall and longer life cycle of product.
If you have any questions or need to talk with us then please send us an email to bnprecast@gmail.com
Inquiry Form
ADDRESS

Plot No. 322, Jalundara Mota Village,
Opp. Galudan Village,
Naroda - Dehgam Road, Ta. Dehgam,
Dist. Gandhinagar - 382305, Gujarat, India.
Tel.: +91 7575809537/38

back to top